ENCAPSULATED SOLENOID COILS 70-0580

INTRODUCTION
All Hansen solenoid valves utilize a one-size
encapsulated, watertight coil. These coils are
strong and efficient, requiring only 16 watts of
power. All common voltages and frequencies
are available. Coils are designed to operate
from 85% to 110% of rated voltage. Pilot light
assemblies are also available. The pilot light
assemblies require no additional wiring.
APPLICATIONS
The standard coil connection is a ?” female
straight pipe fitting (NPSM) for conduit, with two
18” long, insulated 18 AWG wire leads plus ground
wire. Coils with a DIN plug or a Quick Disconnect
plug are available where codes permit.
All coils meet NEMA 3R (IP32) (rainproof) and
NEMA 4 (splashproof) requirements. This sealed
construction can withstand direct contact with
splashing or hose-directed water, wind blown
dust or rain, and remain undamaged by the
formation of ice.
KEY FEATURES
One coil fits all valve sizes
Low wattage
Encapsulated, watertight design
Operates on standard voltages
Combination 50/60Hz coil
Can be used with European/Danish coils using
Coil Adapter Kit 70-1104
Easily installed, no tools required

Long life wireless pilot light optional

MATERIAL SPECIFICATIONS
Coil: Encapsulated, Class “F” construction
Power: 115V 50/60Hz
208/230V 50/60Hz
24V 50/60Hz
24VDC
Operating Range: 85% - 110% of rated voltage
Connections: 1/2” fitting (NPSM), standard
DIN plug for socket, optional
QD Plug with NPSM, optional
CSA & CE Approved
ADVANTAGES
Hansen solenoid coils are totally encapsulated.
The new design minimizes corrosion and provides
a clean finish to the product. The watertight
Hansen coils are completely interchangeable
with the formerly supplied European/Danish coils
provided the proper Coil Adapter Kit is used. See
coil interchangeability drawings on page 3.
Coils have proven reliable for the anticipated
broad ranges of electrical conditions and
temperatures. All Hansen coils are factory pretested to assure reliable operation in the field.